TFY500/900系列多功能低濃重質除渣器

產品概述

TFY500/900系列多功能低濃重質除渣器通過軸向沖洗水單獨控制粗渣的濃縮，可有效的控制纖維流失。纖維流失少，需要的除渣器段數和個數相應減少。分離效率更高，運行濃度最高可達 2%，等靜壓機成型陶瓷錐體，外壁經數控車床加工，尺寸精度高，內表面非常光滑。粗渣中雜質含量高，纖維損失更小。通過對粗渣的稀釋以及在所有各段連續排渣使得運行過程中不會出現堵塞現象。主要特點降低纖維損失，提高能力，減少了除渣器的段數及個數?？蛻粢嗫墒褂迷械某?；用新的軸向沖洗水裝置升級原來的排渣部件，在改造期間檢查并優化您的除渣器，而我們僅對您的系統進行必要的管道改造。底部軸向沖洗水的優化使之除渣器受原料變化的影響降低。

TFY-450的主要技術參數              

單支通過量： 450L/min

最大操作壓力： 0.4MPa

最大操作溫度： 70℃

進出漿壓力差： 0.16MPa

最小良漿壓力： 0.01MPa

進漿濃度： ≤ 2.0%

沖洗水流量： 20 ～ 60L/min

TFY-900的主要技術參數              

單支通過量： 900L/min

最大操作壓力： 0.4MPa

最大操作溫度： 70℃

進出漿壓力差： 0.16MPa

最小良漿壓力： 0.01MPa

進漿濃度： ≤ 2.0%

沖洗水流量： 20 ～ 60L/min

Product overview

TFY series multifunctional centricleaner can control the concentration of coarse slag by axial washing water, which can effectively control the loss of fiber. With less fiber loss, the required number of centricleaners and stages are correspondingly reduced. The separation efficiency is higher, and the operation concentration is up to 2%. The ceramic cone is formed by isostatic press, and the outer wall is processed by CNC lathe, the size accuracy is high, and the inner surface is very smooth. The impurity content in the coarse slag is high and the fiber loss is smaller. Through the dilution of the coarse slag and continuous slag removal in all sections, the blocking phenomenon will not occur during the operation. The main features are reducing fiber loss, improving capacity and reducing the number of stages and pieces of centricleaner. Customers can also use the original centricleaner with the new axial flushing water device to upgrade the original pulp purification system. After checking and optimizing your centricleaners, while we only carry out the necessary pipeline modification for your system. The optimization of bottom axial flushing water can significantly reduce the influence of raw material changing on centricleaners.

Main Technical Parameters of TFY-450

Flow Rate of Feeding Pulp for Single Bottle: 450L/min

Maximum Allowable Operating Pressure: 0.4MPa

Maximum Operating Temperature: 70 ℃

Pressure Difference between Pulp Inlet and Outlet :  0.16MPa

Minimum Pressure of Accepts: 0.01MPa

Concentration of Feeding Pulp: ≤ 2.0%

Flush Water Flow： 20 ～ 60L/min

Main Technical Parameters of TFY-900

Flow Rate of Feeding Pulp for Single Bottle: 900L/min

Maximum Allowable Operating Pressure: 0.4MPa

Maximum Operating Temperature: 70 ℃

Pressure Difference between Pulp Inlet and Outlet :  0.16MPa

Minimum Pressure of Accepts: 0.01MPa

Concentration of Feeding Pulp: ≤ 2.0%

Flush Water Flow： 20 ～ 60L/min

產品概述：

TFY-110 高效重質除渣器是一種高效而經濟的小直徑除渣器，該產品具有小的直徑和延長的除渣器主體以及底部增加的沖洗水裝置，能產生更高的凈化效果，尤其在廢紙脫墨中對油墨的去除能達到更好的效果。主要特點在進行多級精細凈化時，TKS-110 型低濃除渣器可通過底部沖洗水裝置控制廢渣的濃度?？梢杂行У娜コ湍约凹毿m埃。系統采用了最少量的分段及除渣器數量使整體外形更緊湊。減少了占地面積，以較低的投資提高了生產能力。平滑的內表面不會產生湍流（如振蕩和漩渦），因此能在 2.0% 的最大濃度下保持最高的分離效率。減少系統動力消耗。

TFY-110主要技術參數

單支通過量： 110L/min

額定進出漿壓差： 0.15MPa

工作濃度： ≤ 2.0%

沖洗水量： 7 ～ 15L/min

Product overview:

TFY-110 high efficiency high weight centricleaner is a kind of high efficiency and economic centricleaner with small diameter . The product has a small diameter and extended main body as well as a flushing water device added at the bottom, which can produce higher purification effect, especially in the deinking process. The main feature is that TFY-110 type low concentration centricleaner can control the concentration of rejects through bottom washing water device during multistage fine purification, which can effectively remove ink and tiny dust. The system adopts the least number of stages and centricleaners to make the overall shape more compact. It reduces the covered floor area and improves the production capacity with lower investment. The smooth inner surface does not produce turbulence (such as oscillation and vortex), so it can maintain the highest separation and purification efficiency at the maximum concentration of 2.0%, which can greatly reduce the system power consumption.

Main Technical Parameters of TFY-110

Throughput of One Single Bottle: 110L/min

Press Drop: 0.15MPa

Working Concentration: ≤ 2.0%

Flow Rate of Flushing Water: 7 ～ 15L/min