TMZC 除渣器

產品概述：

TMZC 除渣器是公司在第一代產品的使用基礎上，根據國內外用戶的意見反饋，專為解決紙廠的除渣難題而設計的專利產品。該產品可根據用戶需要調整結構，使其分別達到單獨分離重雜質和輕、重雜質一起分離的目的，從而使用戶的一次性投資額大大降低。該產品可分離的重雜質有砂石、鐵屑、涂料及其他重質混合物。輕雜質有塑料片、泡沫、氣體、油墨、粉塵等。底部的反沖水裝置使除渣器可以在較高濃度下運行，降低了投資成本。

Product Introduction

TMZC centricleaner is a patented product specially designed by Tianli Company to solve impurity removal difficulties for paper mills based on the first generation product and the feedback from foreign and domestic customers. The configuration of this product is adjustable, according to user requirement, to solely separate heavy impurity or jointly separate light and heavy impurity, consequently reducing user resources investment. This centricleaner is capable of separating heavy impurity such as gravel, scrap iron, dope and other heavy mixtures, and light impurity such as plastic piece, bubble, air, printing ink, powder and etc. The flush water device installed at the bottom can make the centricleaner operate on the higher concentration pulp, thus reducing the investment.

TMZC-1800主要技術參數

單支通過量： 1800L/min

進漿濃度: 0 ～ 2.0%

進漿壓力： 0.3 ～ 0.4MPa

良漿： 1500L/min

重渣： 140L/min

輕渣： 160L/min

Main Technical Parameter of TMZC-1800

Pulp Inlet Capacity Of One Branch: 1800L/min

Pulp Inlet Concentration 0 ～ 2.0%

Pulp Inlet Pressure: 0.3 ～ 0.4MPa

Fine Pulp: 1500L/min

Heavy Residue: 140L/min

Light Residue: 160L/min

TMZC-1000主要技術參數

單支通過量： 1000L/min

進漿壓力： 0.2MPa ～ 0.4MPa 

進漿濃度： 0-2.0%MPa

Main Technical Parameters of TMZC-1000

Pulp Inlet Capacity: 1000L/min

Pulp Inlet Pressure: 0.2MPa ～ 0.4MPa 

Pulp Inlet Concentration: 0.2-0.4MPa

TMZC-600主要技術參數

單支通過量： 600L/min

進漿壓力： 200 ～ 400kPa

進漿濃度： 0-2.0%

Main Technical Parameters of TMZC-600

Pulp Inlet Capacity: 600L/min

Pulp Inlet Pressure: 0.2 ～ 0.4MPa 

Pulp Inlet Concentration: 0-2.0%

15